•Make sure the phone is set up correctly.
•Wait for the remote party to be online.
Q11. Why can I not hear any sound from the phone while the Wireless Link USB dongle is plugged in to the PC and the wireless setup is properly established?
A11. When the Wireless Link USB dongle is plugged in to the USB port of your PC, the Phone Voice stream will be routed to the handset. If you cannot hear any voice from the phone, check the setting of Sound Devices in SkypeTM. Go to Skype™ > Tools > Options > Sound Devices and make the following settings:
Audio In: Virtual Cable 1
Audio Out: Virtual Cable 2
Ringing: Virtual Cable 2
Q12. Why can I not hear any sound from the PC speakers for normal PC operation while the Wireless Link USB Dongle is plugged in to the PC?
A12. The PC default audio setting might be in the wrong order. You can change back the setting of your PC audio by going to Control panel > Sound > Speech and Audio Device > Sound and Audio Device > Audio. Check Only use default devices.
Q13. What will I do if the phone is out of operating range? How come no signal is detected?
A13. When the phone is out of the Wireless Link USB dongle’s operating range, the phone will keep accessing its signal source for 30 seconds. If detecting the signal fails, the screen shows the message “WiFi Disconnect” and then goes into sleep mode.
To regain the connection, move the handset closer to the Wireless Link USB dongle and press any key on the handset for access retrieval.
Appendix: Reference information |
