Manuals / AT&T / Communications / Cordless Telephone

AT&T 1440 user manual Batteries, Charge the Handset Battery Pack

Models: 1440

1 39

Download 39 pages 14.17 Kb

Page 31

BATTERIES

91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 28

BATTERIES

Charge the Handset Battery Pack

•This battery should remain charged up to six days with the ringer turned on and up to 10 days with the ringer off. A fully charged battery provides an average talk time of about 10 hours.

•The battery pack needs charging when:

—A new battery is installed in the handset.

—The phone beeps twice every five seconds.

—The screen displays and the low battery icon.

•Place the handset in the base so the CHARGING light turns on. The battery pack is typically fully charged in 10 hours.

•You can keep the battery fully charged by returning the handset to the base after each use.

•If you repeatedly get a low battery indicator, even after charging overnight,the battery should be replaced. Use only Replacement Battery 3301,SKU#91076.

CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in the User’s Manual, Part 1.

28

Image 31

AT&T 1440 user manual Batteries, Charge the Handset Battery Pack

Contents

91-5393-20-00ATT1440R0 2003.3.7 1047 AM Page Part 1 - Important Product Information2.4 GHz Cordless Telephone with Caller ID/Call Waiting USER’S MANUALAT&T and the Globe Design are trademarks of AT&TCorp., licensed to Advanced American Telephones Printed in China. Issue 1AT&T 12/0291-5393-20-00ATT1440R0 2003.3.7 1047 AM Page 2002 Advanced American Telephones All Rights ReservedTECHNICAL SPECIFICATIONS . . 35 INDEX CONTENTSINSTALLATION IN CASE OF DIFFICULTY . . . . . 30 DEFAULT SETTINGSWall Bracket NiCd battery pack 2 Telephone line cords Parts ListBEFORE YOU BEGIN Handset Power adapterAbout Caller Identification Caller ID Choose a Location for Your PhoneBefore You Install INSTALLATION2 Install the handset battery To attach Table/Desk Installation1 Connect the telephone line cord 2 Connect the power cord 3 Attach belt clip to the cordless handset optional6 Set Time and Date 3 Charge the handset battery5 Set the dial mode 4 Check for dial tone1 Connect the telephone line cord 2 Connect the power cord Wall Installation4 Follow Steps 3-6 in Table/Desk Installation 3 Mount the base on the wallAnswer a Call Handset VolumeTELEPHONE OPERATION Make a CallFlashes when you havePage/Handset Locator FlashingTemporary Tone Dialing Handset Ringer Style/Battery SaveOperating Range Headset JackTELEPHONE MEMORY ¥NOTE Press at any time to exit memory dial modeStore a Number/Name in Memory Presses Dial Key10 To add additional memory locations follow procedures 1-9 again Edit a Number/Name Stored in Memory 2 Press the memory location key of the entry you wish to delete Delete a Number/Name Stored in Memory3 When the screen displays the number you 1 Press . The screen displays3 Press to dial the displayed memory number Dial a Memory Number1 Press . The screen displays 2 Enter the memory location key of the entry you want to dialDial Key TELEPHONE DIRECTORYStore a Number/Name in the Directory ¥NOTE Press at any time to exit directorynot be able to store a new number until you delete a stored number Edit a Number/Name Stored in the Directory Delete a Number/Name Stored in the Directory ¥NOTE16. To dial a memory number refer to page Dial a Number from the DirectoryAbout Call History CALLER ID OPERATION¥NOTE Press at any time to exit call history Review Call History Turn Off Base NEW CALL IndicatorDelete a Specific Call Delete Records from Call HistoryDelete All Calls Dial a Displayed Number Store a Call History Record in the Directory SCREEN DISPLAYS DISPLAY SCREEN MESSAGESWHEN BATTERIES Charge the Handset Battery Pack2 Lift out the old battery pack and disconnect Replacing the Handset Battery PackIN CASE OF DIFFICULTY PROBLEMSOLUTION PROBLEMSOLUTIONPROBLEM If you hear a two-beep signal when you try to use the handsetIf the phone does not ring when you receive a call messagesSOLUTION If you hear noise or interference when using the phoneIf you hear other calls while using your phone PROBLEMIf you lose a call after changing channels If you have dial pulse rotary servicetelephone services signalsHandset Volume DEFAULT SETTINGSDEFAULT SETTINGS DEFAULT SETTINGRF Frequency Band TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS Operating TemperatureINDEX