91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 3
INSTALLATION
Before You Install
1Choose a location for the base near an electrical outlet and a telephone jack.
This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch.
2Install the handset battery.
Use only the following AT&T Batteries 3301, SKU#91076.
a)Remove battery compartment cover by pressing on the indentation
and sliding downward.
b) Align two holes in plug with socket pins, and snap the plug into place.
c)Place battery pack in compartment with the wires in the lower left corner, along the bottom of the battery pack.
d)Replace cover by sliding it up into place.
3
