Manuals / AT&T / Communications / Cordless Telephone

AT&T 1440 user manual In Case Of Difficulty, Telephone Operation, Solution, Problemsolution

Models: 1440

1 39

Download 39 pages 14.17 Kb

Page 33

IN CASE OF DIFFICULTY

91-5393-20-00_ATT1440_R0 2003.3.7 10:47 AM Page 30

IN CASE OF DIFFICULTY

If you have difficulty operating this phone,try the suggestions below. For Customer Service,visit our website at www.telephones.att.com or call 1–800–222–3111. Please retain your receipt as your proof of purchase.

TELEPHONE OPERATION

PROBLEM

If the phone doesn’t work at all, check these items first:

SOLUTION

•Make sure the AC adapter is plugged into an outlet not controlled by a wall switch.

•Make sure the telephone line cord is plugged firmly into the base unit and the modular jack.

•Make sure the base antenna is fully upright.

•If the handset does not beep when you

press , the battery might need charging.

•Make sure the battery pack is installed correctly.

•If you have dial pulse (rotary) service on your phone line,make sure the dial mode is set to dial pulse (see INSTALLATION).

•Microwave appliances may cause interference with this phone.If you experience interference,move away from the microwave.

PROBLEMSOLUTION

If the above suggestions don’t solve the problem, try re-initializing the

handset and base:

1Disconnect the power to the base.

2Remove the handset battery pack.

3Wait a few minutes.

4Connect the power to the base.

5Insert the handset battery pack.

6Put the handset in the base to re-initialize.

30

Image 33

AT&T 1440 user manual In Case Of Difficulty, Telephone Operation, Solution, Problemsolution, handset and base

Contents

2.4 GHz Cordless Telephone with Caller ID/Call Waiting Part 1 - Important Product InformationUSER’S MANUAL 91-5393-20-00ATT1440R0 2003.3.7 1047 AM Page91-5393-20-00ATT1440R0 2003.3.7 1047 AM Page Advanced American Telephones Printed in China. Issue 1AT&T 12/022002 Advanced American Telephones All Rights Reserved AT&T and the Globe Design are trademarks of AT&TCorp., licensed toINSTALLATION CONTENTSIN CASE OF DIFFICULTY . . . . . 30 DEFAULT SETTINGS TECHNICAL SPECIFICATIONS . . 35 INDEXBEFORE YOU BEGIN Parts ListHandset Power adapter Wall Bracket NiCd battery pack 2 Telephone line cordsAbout Caller Identification Caller ID Choose a Location for Your PhoneINSTALLATION Before You Install2 Install the handset battery 1 Connect the telephone line cord 2 Connect the power cord Table/Desk Installation3 Attach belt clip to the cordless handset optional To attach5 Set the dial mode 3 Charge the handset battery4 Check for dial tone 6 Set Time and Date4 Follow Steps 3-6 in Table/Desk Installation Wall Installation3 Mount the base on the wall 1 Connect the telephone line cord 2 Connect the power cordTELEPHONE OPERATION Handset VolumeMake a Call Answer a CallPage/Handset Locator when you haveFlashing FlashesTemporary Tone Dialing Handset Ringer Style/Battery SaveOperating Range Headset Jack¥NOTE Press at any time to exit memory dial mode TELEPHONE MEMORYStore a Number/Name in Memory Presses Dial Key10 To add additional memory locations follow procedures 1-9 again Edit a Number/Name Stored in Memory 3 When the screen displays the number you Delete a Number/Name Stored in Memory1 Press . The screen displays 2 Press the memory location key of the entry you wish to delete1 Press . The screen displays Dial a Memory Number2 Enter the memory location key of the entry you want to dial 3 Press to dial the displayed memory numberStore a Number/Name in the Directory TELEPHONE DIRECTORY¥NOTE Press at any time to exit directory Dial Keynot be able to store a new number until you delete a stored number Edit a Number/Name Stored in the Directory Delete a Number/Name Stored in the Directory ¥NOTE16. To dial a memory number refer to page Dial a Number from the DirectoryCALLER ID OPERATION About Call History¥NOTE Press at any time to exit call history Review Call History Turn Off Base NEW CALL IndicatorDelete Records from Call History Delete a Specific CallDelete All Calls Dial a Displayed Number Store a Call History Record in the Directory DISPLAY SCREEN MESSAGES SCREEN DISPLAYSWHEN BATTERIES Charge the Handset Battery Pack2 Lift out the old battery pack and disconnect Replacing the Handset Battery PackSOLUTION PROBLEMPROBLEMSOLUTION IN CASE OF DIFFICULTYIf the phone does not ring when you receive a call If you hear a two-beep signal when you try to use the handsetmessages PROBLEMIf you hear other calls while using your phone If you hear noise or interference when using the phonePROBLEM SOLUTIONtelephone services If you have dial pulse rotary servicesignals If you lose a call after changing channelsDEFAULT SETTINGS DEFAULT SETTINGSDEFAULT SETTING Handset VolumeTECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONSOperating Temperature RF Frequency BandINDEX