AT&T 2 manual Adjusting Your Call Settings

Tap Mute to turn your microphone off.. To turn your microphone back on, tap Mute again..

Putting a Call on Hold

During a call, you can put it on hold by tapping Hold..

Tip: If you accept an incoming call while you’re on another call, the first call automatically goes on hold.. Tap Swap to switch between the two callers..

Turning the Speakerphone On/Off

Tap Speaker during a call to turn the speakerphone on.. Tap Speaker again to turn off the speakerphone..

Adding a Call

During a call, tap Add call and dial a number.. When you call another number, the first call automatically goes on hold..

Swapping Calls

To switch between callers, tap Swap..

Merging Calls

To merge two calls and create a conference call, tap Merge calls.. Note: The maximum number of callers on a call varies by carrier..

Ending a Call

Tap to finish a call..

Adjusting Your Call Settings

You can open the call settings menu by tapping		>	> Settings..
Fixed dialing numbers	Restrict outgoing calls to a fixed set of numbers.. To
	do this you must know your SIM’s PIN2 code.. Not all
	carriers support this functionality..
Quick responses	Edit Quick response to rejected callers..
Voicemail	Select a voicemail service provider (your carrier
	is the default), or edit the voicemail number if
	necessary..
	Choose a TTY mode after connecting the TTY
TTY mode	device to the phone’s headset port..
	A TTY device can allow people who have
	hearing or speech disabilities to communicate
	by telephone..
	Turn on/off hearing aid compatibility.. When you
Hearing aids	turn on the hearing aid compatibility and use a
	hearing aid with a Telecoil to answer the phone,
	it will help you hear more clearly during the phone
	call..
DTMF tones	Set the length of dual-tone multi-frequency
	(DTMF) signal tones: Normal or Long..
Speed dial	Set contacts as speed dials for keys 2-9..

14 Phone Calls Phone Calls 15