
Administrator mode
3
Date/Time Setting - Time Adjustment Setting
Select whether the date and time of the machine can be adjusted through passive acquisition from the NTP server.
Item | Description |
Time Adjustment Setting | Select whether or not the time is automatically adjusted with NTP. |
|
|
NTP Server Address | Type in the NTP server address. |
| To type in the host name, select the "Please check to enter host name." check box. |
| If the machine is set to use IPv6, an IPv6 address can also be specified. The only |
| symbols that can be used are the dash |
|
|
Port No. | Type in the NTP server port number. (Range: 1 to 65535) |
|
|
[Adjust] button | Click this button to connect to the NTP server with the specified conditions and ad- |
| just the time. |
|
|
!
Detail
In order to specify the settings on the Time Adjustment Setting page, the time zone must first be specified. For details, refer to "Date/Time Setting - Manual Setting" on page
Timer Setting - Power Save Setting
Specify the settings for the machine’s power-saving modes.
Item | Description |
Low Power Mode Setting | Specify the length of time until the machine enters Low Power mode. |
|
|
C650 |