Konica Minolta C650 manual 3-64, Administrator mode

Administrator mode

3

Item	Description
No.	Displays the number of the LDAP server.
LDAP Server Name	Type in the name of the LDAP server.
Server Address	Type in the address of the LDAP server. (Format: ***.***.***.*** or FQDN: Range for
	***: 0 to 255) The only symbols that can be used are the dash (-) and period (.). To
	type in a host name, check the "Please check to enter host name." check box. If
	the machine is set to use IPv6, an IPv6 address can also be specified.
Port Number	Type in the port number to be used for communication with the LDAP server.
	(Range: 1 to 65535)
Enable SSL	Select whether or not to use SSL/TLS to communicate with the LDAP server.
Port Number (SSL)
Search Base	Specify the starting point for LDAP searches (up to 255 characters).
Timeout	Type in the amount of time until an LDAP search times out. (Range: 5 to 300 sec-
	onds)
Max. Search Results	Type in the maximum that can be received as LDAP search results. (Range: 5 to
	1000)
Authentication Method	Select the LDAP authentication method. The settings that can be specified differ
	depending on the selected authentication method. If "anonymous" is selected, it is
	not necessary to specify the domain name, logon name and password.
Login Name	If any setting other than "anonymous" is selected as the authentication method,
	type in the domain name (up to 255 characters).
Password	If any setting other than "anonymous" is selected as the authentication method,
	type in the password (up to 128 characters).
Domain Name	If "GSS-SPNEGO" is selected as the authentication method, type in the domain
	name (up to 64 characters).
Select Server Authentication	Select the authentication method for the LDAP server.
Method
Use Referral	Select whether or not the referral setting is used.
	If referral is used, the upper and lower levels are searched with the search base
	specified in the LDAP server settings as the starting point.
Initial Setting for Search Details	Specify the conditions for performing a detailed LDAP search. Select "OR", "AND",
	"STARTS WITH" or "ENDS WITH" for the name, e-mail address, fax number, last
	name, first name, city organization and account.

!

Detail

Select the authentication method that is used by the LDAP server being used. For details, refer to the manual for the LDAP server being used.

If "GSS-SPNEGO" is selected as the authentication method, type in the domain name of Active Directory.

To specify Active Directory as the LDAP server and select "GSS-SPNEGO" as the authentication method, specify a DNS server synchronized with Active Directory in the DNS Server Settings of this machine. For details on the DNS server, refer to "TCP/IP Setting - TCP/IP Setting" on page 3-53

When using Active Directory, specify the date and time on this machine. For details, refer to "Date/Time Setting - Manual Setting" on page 3-8.

C650 3-64