
Administrator mode
Note
If "Enhanced Security Mode" is set to enable, "OFF" is selected.
SNMP Setting
Specify the SNMP settings.
3
Item | Description |
SNMP | Select whether or not SNMP is used. If yes, specify whether to use SNMP v1/v2 (IP), |
| SNMP v3, and SNMP v1 (IPX). |
| SNMP v1 (IPX) can be specified only when IPX is enabled. |
|
|
UDP Port Setting | Default setting: 161 |
| Specify the UDP port number. |
|
|
SNMP v1/v2c Setting | Specify settings for using SNMP v1/v2c. |
|
|
Read Community Name | Specify the community name to be used for scanning (up to 15 characters). |
|
|
Write Community Name | Specify the community name to be used for reading and writing (up to 15 charac- |
| ters). |
|
|
SNMP v3 Setting | Specify settings for SNMP v3. |
|
|
Context Name | Specify the context name (up to 63 characters). |
|
|
Discovery User Name | Specify the user name for detection (up to 32 characters). |
|
|
Read User Name | Specify the name of read only user (up to 32 characters). |
|
|
Security Level | Specify the security level for read only user. |
|
|
Specify the read only user authentication password to be used for authentication | |
| (up to 32 characters). |
|
|
Specify the read only user privacy password to be used for privacy (encryption) (up | |
| to 32 characters). |
|
|
Write User Name | Specify the reading/writing user name (up to 32 characters). |
|
|
Security Level | Specify the security level for reading/writing user. |
|
|
C650 |