AT&T IP Flexible Reach Service
Nortel BCM50 Release 3.0 SIP Configuration Guide
Figure 25: RTP Session Information
The BCM Monitor can be used to monitor incoming and outgoing trunks to determine if trunks are being busy or if they are idle. The example below depicts utilized lines used by local and remote telephone/DN numbers.
Figure 26: Line Monitor Information
The BCM Monitor can also be used to monitor all types of system usages. The following are some parameters that can be monitored:
•CPU utilization
•Physical memory
•Media card DSP utilization
•IP sets and IP Trunks
•Voice ports and media gateway usage
© 2007 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks contained herein are the property of their respective owners.
Issue 0.7 | Page 32 of 37 |
