AT&T IP Flexible Reach Service
Nortel BCM50 Release 3.0 SIP Configuration Guide
Under Configuration Æ Telephony Æ Dialing Plan; select “Line Pools.” In this case we selected “BlocA” under the “Pool” tab. We will use this line pool to access the VoIP trunks. Additionally, all DN numbers that need to access the VoIP trunks must be added to this pool. Please see the following screen shots for an example configuration.
Figure 6: Assigning Line Pool to IP Trunks
Figure 7: Assigning DN to Line Pool
© 2007 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks contained herein are the property of their respective owners.
Issue 0.7 | Page 15 of 37 |
