Getting started

Installation options

4.Lift the handset and place it aside. Hold down the switch hook on the telephone base, then slide the handset tab upwards to remove it from the slot. Rotate the handset tab 180 degrees. Push the handset tab down into the grooves so it settles into position.

Switch hook

Handset tab

5. Lift and rotate the bracket and lock it into tabletop position as indicated below.

Wall-mount

Tabletop position

position

 

6.Plug one end of the telephone line cord into the TEL LINE jack on the back of the telephone base. Plug the other end of the telephone line cord into a telephone wall jack. Place the handset in the telephone base.

12

Page 18
Image 18
AT&T CL4939 user manual Wall-mount Tabletop position Position