Answering system operation
Remote access
Replay current or | Press while the telephone is playing |
previous message | the day and time the current message |
4 | was received to go back to the |
| previous message. |
| Press after the telephone plays the |
| day and time the current message was |
| received to repeat the message. |
|
|
Stop | Press to stop playback. |
5 |
|
|
|
Skip to next message | Press during playback to skip the |
6 | current message and advance to the |
| next message. |
|
|
Turn system on or off | Press to turn the answering system on |
0 | or off. |
|
|
NOTES:
•If the answering system is off, the system answers the incoming call after 10 rings and announces “Enter remote access code.” The telephone does not record messages and automatically hangs up after waiting for the remote access code for 15 seconds.
•If the recording memory is full, the answering system answers the incoming call after 10 rings and announces “Memory is full. Enter remote access code.” The telephone does not record messages and hangs up automatically after waiting for the remote access code for 15 seconds.
•If no command is entered within 15 seconds during remote access, the telephone automatically hangs up the call with a beep.
•There is a wallet card listing the remote commands at the back of this user’s manual. Cut it out and keep it in your wallet for quick reference.
51
