Getting started
Installation options
6.Plug the small end of the power adapter into the POWER jack on the back of the telephone base. Plug the large end into an electrical outlet not controlled by a wall switch.
7.Rotate the top of the display up or down to adjust the angle of the screen for maximum visibility.
Wall-mount to tabletop installation
To change the telephone base from the
1.Unplug the large end of the power adapter from the electrical outlet. Unplug the small end of the power adapter from the POWER jack on the back of the telephone base.
2.Slide the telephone base upwards, then pull the telephone base away from the wall and remove from the studs.
3.Unplug the telephone line cord from the telephone base and telephone wall jack. Untie the bundled telephone line cord. Remove the telephone line cord from the slot on the bottom of the telephone base.
11
