4
SAFETY PRECAUTIONS (Cont.)
– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it
from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the
product on bed, sofa, rug, or similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s instructions have been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep distance more
than 60 cm (23-5/8”).
– This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of
power supply to your home, consult your product dealer or local power company.
– This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert
the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded
plug.
– Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against
them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
– For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and
power line surges.
– Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire
or electric shock.
– Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
– Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and
other hazards. Refer all service to qualified service personnel.
– Do not look into the inside of this unit through vents (ventilation holes), etc. Do not look at the light-source lamp directly by
opening the cabinet while the light-source lamp is turned on. The light-source lamp also contains ultraviolet rays and the light
is so powerful that your eyesight can be impaired.
– Xenon gas is enclosed with high pressure inside the light-source lamp (lamp unit) of this projector. If you drop or impart a
shock to the lamp, or discard it as is, there is possibility of explosion, leading to personal injury. Use special care when
handling the lamp. For any unclear points, consult your product dealer.
– Use only the accessory cord designed for this product to prevent shock.
The power supply voltage rating of this product is AC 200 V to 240 V, the power cord attached conforms to the following
power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.
When it is used by other power supply voltage, power cable must be changed.
Consult your product dealer.
*DO NOT allow any unqualified person to install the unit.
Be sure to ask your dealer to install the unit (eg. attaching it to the ceiling) since special technical knowledge and
skills are required for installation.
If installation is performed by an unqualified person, it may cause personal injury or electrical shock.
EN02-06QX1G_f.pm6 02.3.7, 13:364