Controls and Features (cont.)
Cursor (5/∞/2/3) / ENTER (Menu Operation) Button
The remote control unit supplied for this projector has only one button to navigate through the menus. Pressing the menu operation button too strongly may cause an incorrect operation. So, before you use the button in an actual situation, have some practice to make yourself familiar with using the button.
OPERATE | 1 |
MODE 2 | |
2 | ENTER |
| |
LOCK |
|
UNLOCK | EXIT |
|
2
MENU 2
3 VIC
2 VIC
1
2
When using the Cursor (5/∞/2/3) / ENTER button as the ENTER button :
Press the button straight down when the menu is dis-
played. When appears on the selected item, pressing the button causes the submenu to be displayed.
When using the Cursor (5/∞/2/3) / ENTER button as a cursor moving button:
Press the button toward one of the 5/∞/2/3. While the menu is displayed, use the button to select an item to adjust or make adjustment.
Installing Batteries
Install batteries in the remote control unit. If the remote control has started to work erratically, replace the batteries.
1 Open the back cover.
2 Install the batteries.
Place the two batteries
control unit as illustrated below.
·
ª
ª
·
Precautions for using batteries
If batteries are used incorrectly, they may crack or leak liquid. This could cause a fire, burn, malfunction, or staining or damaging the surrounding.
Beware of the following:
•Do not mix new and old batteries.
•Do not mix different types of batteries as they differ in characteristics.
•Place batteries so they match the polarities indicated:
(+) to (+) and
•Be sure to put the minus
•Use only designated batteries.
•Remove the batteries if not used for a prolonged period of time.
•When the batteries are exhausted, replace them immediately. Otherwise, liquid could leak, or malfunction could occur due to leaked liquids. If the leaked liquid contacts the skin, wipe it off with a cloth, otherwise the skin could become rough.
•Do not put batteries into fire or try to recharge them.
•Batteries run for six months to one year in normal use. But the batteries supplied are for confirming operation and may not run that long. When the remote control unit starts failing to work properly, replace the batteries with new ones.
3 Close the back cover.
16