JVC DLA-QX1G manual VIC menu VIC menu 1/2, For RGB VIC, For HDTV/HD-SDI VIC

Menu Operations (Cont.)

Contents of the Menu (Cont.)

The values in the [ ] are initial settings.

■VIC menu (VIC menu 1/2)

In this menu, the setting of the installed VIC can be adjusted. When RGB VIC is selected as the current input terminal, “VIC menu” is available. When HDTV/HD-SDI VIC is selected as the current input terminal, “VIC menu1” and “VIC menu 2” are available.

For RGB VIC

VIC menu

Tracking	1020
Phase	12	3
AD sync adj. 123
Offset & Gain	ENTER
Clamp	ST	BP

Tracking : Adjusts the lateral size and display area of video image within the range of 0 to 4095.

Phase : Adjusts flickering or dim video image within the range of 0 to 15.

AD sync adj. : Adjusts the outline of the text on the screen or reduces the noise. To get the best picture, select a value from the range of 0 to 255. [0]

Offset & Gain : Adjusts the offset and gain of the input signal

	for each RGB.
	Press the ENTER button to go to the next sub
	menu. See “Offset & Gain menu” on page 47.
Clamp	: Sets the clamp pulse’s position at the back
	porch (BP) or on the sync tip (ST). Normally,
	the clamp pulse is used at ST. If, with some
	PCs or workstations, the screen becomes
	unstable such as being too dark or too bright,
	try to switch to BP.	[ST]

For HDTV/HD-SDI VIC

VIC menu 1			VIC menu 2
Tint	123		HDTV	1080i	1035i
Color	123	3	MAIP	OFF	ON
Sharpness 123			2-2/2-3 Pulldown	OFF	Auto
Phase		123	VIC menu 1	ENTER
VIC menu 2		ENTER

•To alternate between the VIC menu 1 and the VIC menu 2, press the ENTER button while the other menu is selected.

Tint		: Adjusts the tint of the video image being
		projected within the range of –30 to 30.
		Normally select 0.	[0]
Color	: Adjusts the color density of the video image
		being projected within the range of –30 to 30.
		Normally select 0.	[0]

Sharpness : Adjusts the sharpness of the video image being projected within the range of –15 to 15.

	Normally select 0.	[0]
Phase	: Adjusts flickering or dim video image within
	the range of 0 to 15.
HDTV	: Selects proper format to project the video
	image of the HD signal with accurate 16:9
	aspect ratio.	[1080i]
	1080i : Normally select this.
	1035i : Select this when the video image is
	not stable.
MAIP	: Detects the degree of moving in the video
	image and gets the best performance to project
	the moving pictures.	[ON]
	ON : For the video image with a lot of moving

pictures.

OFF : For the video image with a lot of still pictures.

2-2/2-3 Pulldown : Automatically adjusts the video image from the film with quick action to be projected

properly.[AUTO] OFF : Not to use this function.

AUTO : Normally select this.

ENGLISH

(To be continued on the next page)

45