Warning Messages
The following shows the warning messages displayed on the screen. When a warning message is displayed, take the corrective action described here.
Message | Cause | Corrective action |
SLOT1 RGB
No Input
•No device is connected to the input terminal.
•The terminal is connected but no signal comes in from the connected device.
*The selected slot number and VIC name are shown in the first line of the massage.
•Connect a device to the selected terminal.
•Operate the connected device and output a signal.
|
| • The frequency of the input video signal | • Input the video signals whose |
|
| is out of range. | frequency is within the projector’s |
| SLOT1 RGB |
| specified range. |
| Frequency of image signal is out of range. | * The selected slot number and VIC |
|
|
| name are shown in the first line of the |
|
|
| massage. |
|
|
|
|
|
|
|
|
|
SLOT1 RGB
No image signal is shown for this type.
•Though the frequency of the input video signal is within the acceptable range, other items such as resolution are out of the projector’s specified range.
*The selected slot number and VIC name are shown in the first line of the massage.
•Input the video signals within the projector’s specified range.
Lamp replacement
EXIT
•The accumulated lamp use time reaches 900 hours.
*Every time the projector is turned on, this message appears on the screen.
•Consult your dealer to arrange for a new
*Press the EXIT button to clear the massage. (This display can be also cleared with the MENU button.)
ENGLISH
Warning
Lamp replacement
EXIT
The word “Warning” blinks.
•The accumulated lamp use time reaches 1000 hours.
•Consult your dealer to replace the
*The message can be cleared by pressing the EXIT button. However, the same message will appear every one hour.
*Once the projector is turned off, the projector does not turn on unless the
53
