Controls and Features
Front Side / Top Surface / Right Side
| 1 |
1 |
|
| 1 |
| 2 |
2 | 3 |
9 | 4 |
| |
8 |
|
7 | 21 6 5 |
1Handles
They are set in place when shipped from the factory. To carry this projector, use them. You can remove them if necessary. For details, refer to “To remove the handles” on page 9.
2Adjustable feet
They are set at the shortest position when shipped from the factory. Turn the foot to make the projector level. Adjustment can be made in the range of ±3.5° vertically and ±4.5° horizontally.
3Connector panel
For details, refer to “Connector Panel” on pages 12 and 13.
4Control panel
For details, refer to “Control Panel” on pages 10 and 11.
5AC IN 
(power input) terminal
This is the power input terminal where the supplied power cord is connected. For details, refer to “Connecting the Power Cord (Supplied)” on page 31.
6MAIN POWER switch
This is the main power switch. When it is turned on, the projector goes into
ON [ ❙ ]: The main power turns on.
OFF [‡]: The main power turns off.
7Remote sensor
When operating with the remote control unit, aim it at this sensor. An additional remote sensor is provided on the control panel of the projector. The effective operating distance of the remote control is about 32.8 ft (10 m) from each of the sensors. The effective operating range of angles is 50° horizontally, and 15° vertically.
8Lens mount
Attach a projection lens separately sold to this mount.
1 | : 1 | |||
1.5 : | 1 | |||
2.1 : | 1 to | 4.9 : 1 zoom lens | ||
3 | : 1 to 7 | : 1 zoom lens | ||
For attaching or replacing the lens, consult your dealer who performed the installation and adjustments of your projector.
8
