JVC DLA-QX1G manual Options menu, Language menu, Color temp. menu, Sub brightness menu

Menu Operations (Cont.)

Contents of the Menu (Cont.)

The values in the [ ] are initial settings.

■Options menu

Options 1			Options 2
Menu position	ENTER		Right Left rev.	OFF	ON
Menu display	15sec	ON	RS-232C [bps]	9600	19200
Line display	5sec	OFF	Sleep time [min]	15 30	60 OFF
Keystone	ENTER		Back color	BLUE	BLACK
Options 2	ENTER		Lens shift	ENTER
			Options 1	ENTER

•To alternate between the Options 1 menu and the Options 2 menu, press the ENTER button while the other menu is selected.

Menu position : Adjusts the position of the displayed menu. Press the ENTER button to go to the next sub menu. See “Menu position menu” on page 47.

Menu display : 15sec : Turns off the menu automatically in 15 seconds after operating the menu.

ON : Not to turn off the menu automatically. If you want to turn it off,

press the MENU button. [15sec]

Line display : 5sec : Indicates the line display when the video input is switched. The line display goes off automatically in 5 seconds after switching to video input.

OFF : Does not indicate the line display. [5sec]

Keystone : Adjusts the trapezoidal distortion of the projected image.

Press the ENTER button to go to the next sub menu. See “Keystone menu” on page 47.

Right Left rev. : ON : Reverses the video Image right-to-left.

OFF: Not to use this function. [OFF]

RS-232C [bps] : Sets the baud rate (transmission speed). [19200]

Sleep time [min]: Sets the length of sleep time. A set sleep time after input signal is depleted, the projector goes into stand-by mode. (If you select “OFF,” the

sleep time will be cleared.)[OFF]

Back color : Specifies the background color shown when

there is no video signal. [BLUE]

Lens shift : Adjusts the lens shift.

This function takes effect only when the installed lens has the lens shift function. Press the ENTER button to go to the next sub menu. See “Lens shift menu” on page 47.

■Language menu

Language

English

Deutsch

Español

Italiano

Français

Language : Text on the screen can be changed to a language other than English. Languages that can be displayed are the following six :

(Japanese), English, Deutsch (German),

Español (Spanish), Italiano (Italian), and

Français (French). [English]

■Color temp. menu

Color temp.

5500K
6500K
User 1	ENTER
User 2	ENTER

Color temp. : Adjusts the white color of the video image when it becomes reddish or bluish.

The higher the color temperature, the bluer

the video image is.[6500K] 5500K : Select this when the video image is

bluish.

6500K : Select this when the video image is reddish.

User 1 or 2 : Select this when you want to adjust the setting in detail.

Press the ENTER button to go to the next sub menu. See “User 1 or 2 menu” on page 47.

■Sub brightness menu

Sub brightness

R123

G123

B123

Sub brightness : Adjusts the brightness for each R/G/B within the range of –128 to 127.

When all R/G/B signals are adjusted equally, you can adjust the brightness of the video image without changing its color temperature.

[0]

46