AT&T TL9228, TL9278 user manual Chain dialing, Directory, Caller ID history call log

Telephone operation

NOTES:

1.You cannot edit a directory entry while you are on a call. For more details about the directory, see page 41.

2.You cannot copy a caller ID entry into the directory while you are on a call. For more details about the caller ID history, see page 47.

3.While on a call, only the most recently called number can be reviewed, and erasing the entry is not allowed. For more details about the redial memory, see page 31.

4.Press and hold

OFF/CLEAR to exit redial, directory or caller ID history when you are on a call.

Chain dialing

This feature allows you to initiate a dialing sequence from numbers stored in the directory, caller ID history or redial list while you are on a call. This feature is available only when you are making a HOME call.

Chain dialing can be useful if you wish to access numbers other than phone numbers (such as bank account information or access codes) from the directory, caller ID history or redial list.

Directory

1.Press MENU/SELECT twice.

2.Press DIR / CID to scroll to the desired number.

3.Press MENU/SELECT to dial the displayed number.

Caller ID history (call log)

1.Press MENU/SELECT.

2.Press DIR / CID to scroll to >CALL

LOG.

3.Press MENU/SELECT.

4.Press DIR / CID to scroll to the desired number.

5.Press MENU/SELECT to dial the displayed number.

Last number redial

Press REDIAL/PAUSE to display and dial the most recently dialed number. If you press REDIAL/PAUSE again within two seconds, the number will not be dialed.

36