AT&T TL9228, TL9278 user manual Models TL92328/TL92378 three-handset system, Handset X is Calling

Telephone operation

NOTES:

1.Before the intercom call is answered, you can cancel the intercom call by pressing OFF/CLEAR on the calling handset.

2.If the called handset is not answered within 100 seconds, or if it is in the directory or caller ID history mode, or on a call, or out of range, the calling handset will show the message UNABLE TO CALL TRY AGAIN.

3.Pressing OFF/CLEAR or DELETE/MUTE will temporarily silence the intercom ringer.

4.A maximum of four handsets can be used at a time. When two handsets are being used on an intercom call, the other two handsets in the system can be used for a call on either the HOME or CELLULAR line.

Intercom

Models TL92328/TL92378 (three-handset system)

1.Press MENU/SELECT when in idle mode to enter the feature menu.

2.Use DIR / CID to scroll to

>INTERCOM, then press MENU/SELECT. The screen will show INTERCOM TO:.

3.Enter the handset number 1-9or, for handsets 10, 11 and 12, enter *0, *1 or *2, respectively. The display will show CALLING HANDSET X, with X being the handset number. The called handset will ring, and its screen will show

HANDSET X IS CALLING.

4.On the ringing handset, press HOME/FLASH orSPEAKER to answer the intercom call.

To end the intercom call:

•Press OFF/CLEAR on either handset.

-OR-

•Place either handset in the charger or telephone base.

38