Appendix I
Troubleshooting
I cannot dial | • | First try all the suggestions above. | |
out. | • | Make sure you have a dial tone before dialing. The | |
| |||
|
| cordless handset may take a second or two to find the | |
|
| telephone base and produce a dial tone. This is normal. | |
|
| Wait an extra second before dialing. | |
| • | Eliminate any background noise. Noise from a television, | |
|
| radio or other appliances may cause the phone to not | |
|
| dial out properly. If you cannot eliminate the background | |
|
| noise, first try muting the cordless handset before | |
|
| dialing, or dialing from another room in your home with | |
|
| less background noise. | |
| • | If the other phones in your home are having the same | |
|
| problem, the problem is in your wiring or local service. | |
|
| Contact your local telephone company (charges may | |
|
| apply). | |
|
|
| |
My cordless | • | Make sure the power cord is securely plugged into the | |
handset isn’t |
| telephone base. Plug the unit into a different, working | |
performing |
| electrical outlet not controlled by a wall switch. | |
normally. | • | Move the cordless handset closer to the telephone base. | |
| |||
|
| You might have moved out of range. | |
| • | Reset the telephone base. Unplug the unit’s electrical | |
|
| power. Wait for 15 seconds then plug it back in. | |
|
| Allow up to one minute for the cordless handset and | |
|
| telephone base to reset. | |
| • | Other electronic products can cause interference to | |
|
| your cordless phone. Try installing your phone as far | |
|
| away from these types of electronic devices as possible: | |
|
| television sets, VCRs, or other cordless telephones. | |
|
|
| |
SEARCHING | • | Ensure that the telephone base is powered up. | |
FOR BASE | • | Place the cordless handset in the telephone base for | |
displays on my | |||
| one minute to allow the cordless handset and base to | ||
cordless handset. |
| ||
| resynchronize. | ||
|
| ||
| • | Move the cordless handset closer to the telephone base. | |
|
| You might have moved out of range. | |
| • | Reset the telephone base. Unplug the unit’s electrical | |
|
| power. Wait for 15 seconds then plug it back in. | |
|
| Allow up to one minute for the cordless handset and | |
|
| telephone base to reset. |
88
