AT&T TL9278, TL9228 user manual Message counter displays

Answering system

Message counter displays

The message counter usually displays the total number of answering system messages. See the table below for other message counter displays.

Message counter displays

0	No messages.
0 (flashing)	The clock needs to be set (pages 55-56).
1-99	Total number of old messages and
	memos, or message number currently
	playing.
1-99(flashing)	Total number of messages and memos.
	The number flashes when there are new
	(unreviewed) messages.
	After a power failure, the number in the
	message counter will flash to indicate the
	clock needs to be set.
10-99	Current remote access code while setting
	(page 62).
1-99(counting)	Elapsed time while recording a memo
	(page 66) or announcement up to 90
	seconds (page 58).
99 (flashing)	A memo recording is longer than 99
	seconds.
1-99 & F	Memory is full. Messages must be
(alternating)	deleted before new messages can be
	recorded.
--	The system is answering a call, being
	accessed remotely, or the clock is being
	set.
-- (flashing)	The system is being setup, initialized or
	messages are being deleted.
02, 04, 06,	Displayed while setting the number of
tS	rings (page 61).
1-8	Displayed for two seconds while
	adjusting the telephone base speaker
	volume.
HI, LO, OF	Displayed for two seconds while
	adjusting the telephone base ringer
	volume.

67