JVC GV-DS2 manual HOW to Store Jlip Video Producer Software Data

EN 37

HOW TO STORE JLIP VIDEO PRODUCER SOFTWARE DATA

Data from this unit can be converted to JLIP Video Producer software files.

If index image data is saved as a JLIP Video Producer software file, the file can be printed with the optional GV-PT2E Video Printer.

Refer to the instruction manual for details.

File

New Album	Ctrl+N
Open Album	Ctrl+O
Save Album	Ctrl+S
Open JLIP (jlp) File
Save As JLIP (jlp) File
Save Image As…	Ctrl+A
Exit

Preparation

•Make sure all units are properly connected (☞ p. 12).

•Insert a video tape into the video source unit.

•If you want to store the data on a floppy disk, load a data disk into the floppy disk drive, create a directory and sub-directory on the data disk (☞ p. 54).

1 Open the menu bar and click "File" — "Save As JLIP (jlp) File".

•The "Save As JLIP (jlp) File" window is displayed.

2 Enter the folder name (directory) and file name.

•If you want to store the data on a floppy disk, enter the drive name.

3 Click "OK".

•The data converted to a JLIP Video Producer software file is stored on the floppy disk in the selected drive.

•JLIP Video Producer software files can be used for video program editing or printed with the video printer

(☞ p. 60, 62).

NOTE:

When stored data is opened with the JLIP Video Producer software, the edit-in and edit-out points have the same counter value. When you want to perform program editing, change the counter number at the edit-out point in the JLIP Video Producer software’s "Modify Edit Points".