JVC GV-DS2 manual Printing, Bring UP Video Printer Window, Playback, Store Scene

60EN

VIDEOPRINTEROPERATION(GV-PT2)

Printing

Before printing, perform the procedure listed below.

●Connect to image and sound source (☞ pg. 12, 13).

●Set VCR to external input.

●Set TV to VIDEO mode so that images from video printer appear.

1 BRING UP VIDEO PRINTER WINDOW

Select "Video Printer" from "Window" on the JLIP VIDEO PRODUCER window.

•The "Video Printer" window appears. •To view the buttons on the JLIP VIDEO PRODUCER window, move the "Video Printer" window to the right and up

keeping the title bar on the "Video Printer" window clicked.

2 PLAYBACK

Click ♣ on the JLIP VIDEO PRODUCER window.

•The "Video Printer" window appears behind the JLIP VIDEO PRODUCER window.

•To view the "Video Printer" window, click the title bar labelled "Video Printer".

3 STORE SCENE

Click "STORE" on the "Video Printer" window at the scene you want to print.

•The selected scene is stored in memory and appears on the TV monitor.

4 PRINT

Insert print paper into the video printer and click "PRINT".

•Also refer to the video printer's instruction manual.

The following print styles are also available:

●Printing the same scene 4 or 16 times on one sheet. (Multi-Print)

●Printing various scenes on the same print sheet. (Multi-Print)

●Printing a scene within a scene. (Inset Print)

●Storing a selected number of images at short intervals and printing them on one sheet.

(Strobe)

Also refer to the video printer's instruction manual.

JLIP VIDEO PRODUCER

File Edit Set-up Window Help

COUNTER	VCR Control	ID	06	FILE
	00:06:38:11F
	Video Printer

POWER ON OFF MEMO

PROGRAM PLAYBACK		SCENE	START	BF WF
SCENE	CUT IN	CUT OUT		B W
				TC
				BW
	ELAPSED TIME	00:00:00:00F		EC

IN/OUT

Video Printer
POWER		ON OFF	POSITION		ID 20
			HIGH	LOW	STORE
16		STROBE
4	SELECTED		STROBE SPEED		PRINT
OFF		SAME	ON	OFF	SELECT
			PIX STABILIZER		SOURCE
MULTI-PIX		CONTENT			MEMORY
		Aperture Off ! !			CLOSE