1.POWER button
•Turns the device on and off.
•If power is not supplied to the camcorder beforehand, you can not turn the camcorder on and off by clicking this button.
•Some camcorders cannot be turned on and off by clicking this button.
2.COUNTER system
3.Tape counter display
•Displays actual tape position.
ex.
00: 01: 45: 10F
(Hours : Minutes : Seconds : Frames)
4.ID number
•Displays the selected device's ID number.
5.FILE name
•Displays file name after saving the program under a new name.
ex. travel
6.MEMO
•If you wish to add some comment to the file, you can input it.
ex. Europe Tour
7.IN/OUT point display
•You can set up to 99 in/out points per file.
8.SCENE button
•Plays back only one programmed scene so that you can preview it.
•Operates only the camcorder.
9.START button
•Starts editing. Scenes are recorded in scene's numerical order. After starting editing, this button changes to STOP button.
10.ELAPSED TIME
•Displays the total elapsed time of all the programmed scenes.
EN 49
11.Camcorder's operation buttons
•Operate the camcorder.
Stop button
REW/REW Search button
Play button
FF/FF Search button
Pause button
Reverse Slow button
Forward Slow button
•To start Reverse/Forward
•Functions your camcorder does not have cannot be performed by the above buttons.
•Click "Window" — "VCR Control" on menubar to call up the "VCR Control" window. You can control the video source unit from this window.
12.IN/OUT point button
•Registers the
13.P.AE/Effect buttons
•Set one of the 5 P.AE/Effects per programmed scene.
•To cancel the selected effect, press the EC (Effect Clear) button.
14.Fade/Wipe Effect buttons
•Set one of the 7 Picture Wipes and 10 Fades/Wipes per scene transition.
•To cancel the selected effect, press the TC (Transition Clear) button.
15.Message display
•Displays the connected device mode, etc.
To exit from the VIDEO PRODUCER window, choose "Exit" from "File".
NOTE:
If you need the "JLIP VIDEO PRODUCER HELP" window, choose "Contents" from "Help".
