JVC GV-DS2 manual Prepare Devices, Access Video Producer, Select Serial Port

46EN

STARTINGJLIPVIDEOPRODUCERSOFTWARE

JLIP VIDEO

PRODUCER

Serial Port Selection

Select a Serial Port.

COM 1

COM 2

COM 3

COM 4

OKCANCEL

Initializing JLIP

Now checking devices' ID ...

ID:10

Starting JLIP Video Producer Software

1 PREPARE DEVICE(S)

Turn the device(s) on and set the camcorder's Power Dial to "PLAY".

2 ACCESS VIDEO PRODUCER

Double-click the JLIP VIDEO PRODUCER icon and the Serial Port Selection dialog box appears.

3 SELECT SERIAL PORT

Select the port number of the connector you are using to connect the computer to the Video Capture Docking Station.

•If the connector number is A, B... A corresponds to 1.

•Click "OK".

•If the connection is correct, the Device Selection dialog box appears.

•An error message "No devices detected to connect. Power ON all devices in system." appears . . .

... when a wrong port number is selected.

... when the connection is wrong.

... when the device's ID number is already in use.

... when the device's power is not turned on.

Check the Serial Port selection, too.

To return to step 1, check the connection and the device's power and try again.

•When all serial COM ports are occupied by other applications the error message "Error — This application will close. Check devices — Confirm that power is ON." appears. Free a serial COM port to start up JLIP Video Producer Software.