JVC GV-DS2 Close, Check devices - Confirm, That power is on, No devices detected to, Connect

68

EN

TROU

B

LE

S

HO

O

TI

NG

MESSAGE

⬤ POSSIBLE CAUSE

⬛ CORRECTIVE ACTION

Error – – This application will

⬤ The COM port used for the JLIP connector is not

close.

selected, or the COM port is selected but the

Check devices – – Confirm

connection is wrong.

that power is ON.

⬛ Check the connected COM port and select it on the

"Serial Port Selection" screen (☞ pg. 46).

No devices detected to

⬤ Power is not supplied or the connection is wrong.

connect.

⬛ Connect the devices correctly and turn them on

Power ON all devices in

(☞ pg. 12, 13).

system.

Communication error

⬤ Device is not turned on or cable is disconnected.

(&H (number))

⬛ Connect the device correctly and turn it on

Check cable connection.

(☞ pg. 12, 13).

⬛ If device was turned off and on again during

operation, click "OK". All devices should function

properly.

Select the device to control.

⬤ The line where the name of the device to use

appears is not clicked.

⬛ Click on it and "OK" (☞ pg. 47).

No video cassette!!

⬤ The video cassette is not loaded in the camcorder.

Load a video cassette to ID

When the video cassette is removed during

(number).

operation, this message appears.

⬛ Insert the video cassette into the camcorder.

Invalid entry in scene

⬤ The value of the CUT OUT point is smaller than the

(number) (There is IN > OUT

CUT IN point's.

condition). Correct the time

⬛ Set the value of the CUT OUT point so that it is

or delete the scene.

larger than the CUT IN point's (☞ pg. 50).

Select a number between 0

⬤ When correcting the CUT IN/OUT points, the value

and 24.

you set differs from the original by over 25 frames.

⬛ Select integral number from 0 to 24 (☞ pg. 54).

This device has been selected

⬤ You selected a device already designated as a player

as the player. Please select

to be the recorder.

another device.

⬛ Select another device capable of playback

(☞ pg. 47).

This device has been selected

⬤ You selected a device already designated as a

as the recorder. Please select

recorder to be the player.

another device.

⬛ Select another device capable of recording

(☞ pg. 47).

The monitor displays of the application software illustrated in this manual may differ from those you are actually viewing depending on the operating environment of your computer.