JVC GV-DS2 manual Using Jlip Video Producer Software Data, Open Jlip jlp File window is displayed

36EN

JLIPVIDEOPRODUCERSOFTWARE

USING JLIP VIDEO PRODUCER SOFTWARE DATA

The Video Capture Docking Station can capture JLIP Video Producer software data at an edit-in point corresponding to a preset counter number.

File

New Album	Ctrl+N
Open Album	Ctrl+O
Save Album	Ctrl+S
Open JLIP (jlp) File
Save As JLIP (jlp) File
Save Image As…	Ctrl+A
Exit

Preparation

•Make sure all units are properly connected (☞ p. 12).

•Insert the tape program edited with the Video Producer Software into the video source unit.

•If the data is stored on a floppy disk, load disk into the floppy disk drive.

1 Open the menu bar and click "File" — "Open JLIP (jlp) File".

•The "Open JLIP (jlp) File" window is displayed.

2 Double-click the name of the desired folder (directory) in the Select Directory box.

•If the data is stored on a floppy disk, enter the drive name.

3 Click on the file name to select it.

4 Click "OK".

•The computer monitor displays Scene No., counter number at Edit-in Point, and a blank image box.

5 Open the menu bar and click "Set-up" — "Capture Mode" — "Automatic".

6 Select the data you want to transfer and "Program Capture" and click "OK".

7 Click the "TRANSFER" button.

•The image data scanned by the video source unit is automatically transferred to your computer.