AT&T TL9228, TL9278 user manual Handset settings, Ringer volume

Handset settings

>DIRECTORY CALL LOG

>DIRECTORY CALL LOG

>RINGER VOLUME RINGER TONE

RINGER VOLUME

Handset settings

Using the feature menu, you can customize many of the telephone’s settings.

1.Press MENU/SELECT when in idle mode (when the phone is not in use) to enter the feature menu.

2.Use DIR / CID to scroll to the feature to be changed. When scrolling through the menu, the top menu item is always highlighted with a > symbol.

3.Press MENU/SELECT to select the highlighted item.

NOTE: Press OFF/CLEAR to cancel an operation, back up to the previous menu or exit the menu display. Press and hold OFF/CLEAR to return to idle mode.

Ringer volume

Using this menu, you can set the ringer volume level (1-6), or turn the ringer off. When the ringer is turned off, appears on the handset screen. The volume setting applies to both HOME and CELLULAR calls.

To adjust the RINGER VOLUME:

1.Press MENU/SELECT when in idle mode to enter the feature menu.

2.Use DIR / CID to scroll to >RINGER VOLUME, then press MENU/SELECT.

3.Press DIR / CID to sample each volume level.

4.Press MENU/SELECT to save your preference and return to the feature menu.

NOTE: The ringer volume also determines the ringer volume of the intercom calls (pages 37-38) and the paging tone for the handset locator feature (page 32). If the handset ringer volume is set to off, that handset is silenced for all incoming calls and paging.

22