Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Getting started

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Clock Setting is displayed, press OK to select.

 

 

The charge capacity of rechargeable

 

 

 

batteries will reduce with time as they

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. The current time and date setting is displayed. Enter 2 digits

wear out, giving the handset less

 

talk/standby time. Eventually they

 

 

for the hour and 2 for the minute (e.g. for 2.15pm, enter

 

 

will need to be replaced. New battery

 

 

,

,

,

 

). The cursor moves across

 

 

packs are available from the BT Verve

 

 

 

 

 

 

 

automatically, now enter 2 digits each for the day, month and

500 Helpline on 0870 242 6652.

 

 

After charging your handset for the

 

 

year, e.g. for 6th May 2006 press

 

,

,

 

,

,

 

 

 

 

first time, subsequent charging time

 

 

 

 

,

then press OK to confirm.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is about 6–8 hours a day.

 

 

 

 

 

 

 

 

 

 

4.

 

Press

to exit and return to standby.

 

 

 

 

The battery and handset may become

 

 

 

 

 

 

warm during charging. This is normal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you subscribe to a Caller Display

 

 

 

BT Verve 500 multiple pack owners

 

 

 

 

 

Service from your network provider

 

 

 

 

 

 

 

 

the time will be set when you receive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For each additional handset:

 

 

 

 

 

 

 

your first call.

 

 

 

 

 

 

 

 

 

 

The default time setting is 12:01pm.

 

1.

Plug the power adaptor cable into the underside of the charger

 

The default time setting is 1st January

 

 

and plug the other end into the mains wall socket and switch

2006 (01/01/06).

 

 

 

 

 

 

 

the power on.

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Insert the batteries as described on page 7, point 2.

 

 

 

 

3. Place the handset in the charger and charge for at least

 

You need to place your BT Verve 500

 

 

 

24 hours.

 

 

 

 

 

 

 

 

 

 

 

charger close enough to a mains

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power socket so that the cable

 

4. Any additional handsets that came with your BT Verve 500

will reach.

 

 

 

 

 

 

are ready for immediate use and normally there is no need to

 

 

 

 

 

register them to the base. If you do need to register a

 

 

 

 

 

 

handset, please see page 33.

 

 

 

 

 

 

 

 

 

 

Your BT Verve 500 is ready for use.

 

 

 

 

 

 

 

 

If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com

Page 9
Image 9
BT 500 Clock Setting is displayed, press OK to select, Current time and date setting is displayed. Enter 2 digits, Press