BT 500 Answeringmachine settings (via the base)

51
Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com
2. Use the NAVIGATION buttons to highlight the symbol
and press
OK to select.
3. Press DOWNto highlight
RecordMemo and press OK .
4. Speak your message clearly, close to the handset microphone
and press
Stop soft key to send recording.
5. Press to exit and return to standby.
Answeringmachine settings (via the base)
Switch the answering machine ON/OFF and select the
answer mode
1. Press repeatedly until the setting you want is
announced. You can select from “Answer and record is on”,
“Answering only is on”, “Answering Machine is Off”.
Check/deletethe OGM
1. In s tandby mode, press and release ,the outgoing
message will be played back toyou for checking.
2. To delete the outgoing message and return to using the
default outgoing message, press during playback.
The default setting is Answer On,
Answer and Record mode.
When set toAnswer On, using
‘Answer and Record’, the message
counter will display 00 and your
selected Answer & Record outgoing
message will be played to callers.
When set toAnswer On, using
‘Answer Only’, the message counter
will display Ao and your selected
Answer Only outgoing message will
be played to callers.
The outgoing message is selected via
the handset, see page 47.
When set toAnswer Off,the message
counter will display - -.
Make sure you have selected the
answering mode you want before
checking the outgoing message.
Answering machine