Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
General information | 85 |
Connecting to a switchboard
This product is intended for use within the UK for connection to the public telephone network and compatible switchboards, which support tone and pulse dialling and timed break recall. If in doubt please consult your service provider.
Inserting a pause
With some switchboards, after dialling the access code you may have to wait for a moment while the switchboard picks up an outside line so you will need to enter a pause in the dialling sequence.
Press and hold 
to insert a pause (P) before entering the telephone number.
You may also need to enter a pause when storing international numbers or charge card numbers.
Recall
You may need to use the recall function if you are connected to a switchboard/PBX (Private Branch Exchange), contact your PBX supplier for further information. The recall function is set to timed break recall and is also used for BT Calling Feature.
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com
