Verve 500 – New Style – Edition 3 – 07.09.06 – 7706
16Using the phone
Receive a call
Caller Display
If you have subscribed to your network’s Caller Display service, the caller’s number (or name if stored in the phonebook) is displayed instead of External Call. See page 57 for more information.
If the number is longer than 15 digits, the display will only show the last 15 digits entered.
Auto answer
As long as you have auto answer set to ON you can just pick the handset up off the base to answer a call. If you have switched it off, you will need to press . Auto talk OFF is the default setting. For more information on auto answer, see page 33.
Internal calls
If the call is from another internal handset, the number of the calling handset will be displayed, instead of
External Call.
When you receive a call, the phone rings and the icon flashes in the display.
To answer the call:
1.If your handset is on the base and auto talk is on, pick up the handset.
Or
If your handset is on the base and auto talk is off, pick up the handset and press .
Or
If your handset is off the base, press .
Earpiece/receiver volume
During a call you can adjust the volume of the earpiece/handset receiver. There are 5 volume settings, which are shown as Volume 1, 2, 3, 4 or 5 on the display.
1. Press UP to increase or DOWN to decrease the volume.
You can also adjust the earpiece / receiver volume using the menu, see page 29.
As you increase or decrease the volume, the volume level is displayed on the screen.
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com