Place a Test Call

Place a test call from your connected home phone. Make sure to use 10-digit dialing even for local calls.

Useful Tips

•  Dial “1” to set up and access your voicemail. Be sure to create a password for security and remote access. Use of answering machine systems is not recommended.

•  Transferring a landline phone number can take five (5) days or more. Outgoing calls can be made immediately, while incoming calls will continue through your old service until the transfer

is complete. Check status at www.att.com/port.

•  Your AT&T Wireless Home Phone Base does not support incoming or outgoing fax service.

•  Your AT&T Wireless Home Phone Base supports voice only over the AT&T cellular network.

•  Your AT&T Wireless Home Phone Base does not support rotary or pulse-dialing phones.

Details on using voicemail and transferring a landline phone number can be found below and on the following pages.

Voicemail

Your Wireless Home Phone Base comes with standard wireless voicemail. Follow the steps below to setup and use your voicemail.

Setup

Dial 1 on any home phone connected to the Wireless Home Phone Base and wait four (4) seconds to connect to your AT&T wireless

8

Getting Started

Page 14
Image 14
AT&T WF720 manual Voicemail, Place a Test Call, Useful Tips, Setup