voicemail. Simply follow the voice prompts to complete setup. To
enable remote voicemail retrieval and for added security be sure to create a password during setup.
Message Waiting
There are two indicators for a new message waiting: 1) the voicemail icon; and 2) an intermittent dial tone.
The voicemail icon 
on your Wireless Home Phone Base flashes when a voicemail message is waiting. You will also hear an intermittent dial tone on any connected phone handset before placing a call.
Retrieving Messages
To retrieve voice messages, dial 1 on any home phone connected to the Wireless Home Phone Base and wait four (4) seconds to connect to your AT&T wireless voicemail box. Simply follow the voice prompts to listen to and manage your messages. (Alternately, you may dial your
Remote Retrieval
To retrieve voicemail messages from a phone not connected to the Wireless Home Phone Base, dial the number associated with your Wireless Home Phone Base service. When voicemail picks up, press *. You will then be prompted to enter your password. Simply follow the prompts to listen to and manage your voicemail messages.
Transferring a Phone Number
Transferring a landline phone number to your Wireless Home Phone Base can take five (5) days or more. Outgoing calls can be made immediately using your Wireless Home Phone Base, however incoming calls will continue through your old service until the transfer is complete. It is recommended that a phone be kept connected to your existing home wiring or prior service to continue to receive incoming calls until the transfer is complete. To check the status of your transfer, visit www.att.com/port.
Getting Started | 9 |
