10 Using Your Device
Calling
Making Calls
Using a phone connected to your Wireless Home Phone Base, place
and receive calls as you normally would. The Wireless Home Phone
Base supports both cordless and corded phone dialing methods.
Note: You will need to dial 10 digits even for local numbers.
Three-Way Calling
While on an existing call, press the Flash (or Talk) key on your
phone to put the first party on hold. When you hear a dial tone, dial
the second parties’ number (wait up to four [4] seconds). When
the second party answers, press the Flash (or Talk) key again to
complete the three-way connection. If the second party does not
answer, press the Flash (or Talk) key to end the connection and
return to the first party.
Note: If your phone does not have a Flash (or Talk) key, use the
off-hook mechanism supported by your phone instead
.
Call Waiting
You will hear two tones if someone calls while you are already on
a call.
To hold the current call and accept the waiting call, press the Flash
(or Talk) key. You can press the Flash (or Talk) key anytime to switch
back and forth between calls.
To clear the current call and accept the waiting call, enter 1 and
press the Flash (or Talk) key.
To reject (User Busy) the waiting call, enter 0 and press the Flash
(or Talk) key.