Appendix C Standards and compliances
The equipment described in this manual generates and uses radio frequency energy. If this equipment is not used in strict accordance with the manufacturer's instruction, it can and may cause interference with radio and television reception. Refer to the ATTO FibreBridge Technical Specification sheet for your particular model for a full list of certifications for that model.
FCC Standards: Radio and Television Interference
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at own expense.
If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures:
•Move the receiving antenna.
•Relocate the bridge with respect to the receiver, or move the bridge away from the receiver.
•Plug the computer into a different outlet so the computer and receiver are on different branch circuits.
•If necessary, consult an ATTO authorized dealer, ATTO Technical Support Staff, or an experienced radio/television technician for additional suggestions.
The booklet How to Identify and Resolve Radio/TV Interference Problems prepared by the Federal Communications Commission is a helpful guide. It is available from the US Government printing office, Washington, DC 20402, Stock No.
Canadian Standards
This Class A digital apparatus complies with Canadian
Cet appareil numérique de la classe A est conforme à la norme
Canada.
European Standards
Declaration of Conformity
This following statement applies to the ATTO FibreBridge.
This device has been tested in the basic operating configuration and found to be compliant with the following European Union standards:
Application of Council Directive: 89/336/EEC
Standard(s) to which conformity is declared: EN55022,
xvii
ATTO Technology Inc. FibreBridge Installation and Operation Manual
