ATTO Technology 2370E, 2390C/R/D, 2400C/R/D operation manual Remote monitoring, management

3.2 Remote monitoring, management

The Ethernet port provides monitoring and management using the ExpressNAV interface.

Remote system monitoring may be set up through Remote Management page of the ExpressNAV interface (see Exhibit 3.0-3)using the Simple Network Management Protocol (SNMP) or Email.

Various types of problems may create a notification:

•Device errors such as medium error, aborted command and hard error

•Device transitions from online to offline

•Critical and warning temperature conditions

•Critical and warning voltage conditions

Messages may state that a device is not working, a medium has an error, or a command has been stopped.

You may designate which warning level a recipient receives. For example, a recipient with a critical severity level only receives critical messages and not warning or informational messages.

In both monitoring systems, you select the warning levels for each recipient:

•All: all warnings, critical events and informational messages

•Informational: all warnings, critical events and informational messages

•Warning: events which are either warnings or critical events

•Critical: only events which are critical

•None: no messages are sent

Exhibit 3.0-3 The Remote Management page in the ExpressNAV interface

19

ATTO Technology Inc. FibreBridge Installation and Operation Manual