Appendix: Connecting the components
246
Figure 41: Cable routing tracks and mounting holes
8. Wall-mount your IP Deskphone(optional). Your
Avaya 1165E IP Deskphone can be mounted either by: (Method A)
using the mounting holes on the bottom of the IP Deskphonestand, or
(Method B) using a traditional-style wall-mount box with RJ-45
connector and 15-cm (6-inch) CAT5e cable (not provided).
Complete steps 1-7, as needed, before you wall-mount your IP
Deskphone:
Method A: Press the wall-mount lever, and pull the IP
Deskphoneaway from the stand. Using the stand cover (the part you
removed in step 1), mark the wall-mount holes by pressing the bottom
of the stand cover firmly against the wall in the location where you
wish to install the IP Deskphone. Four small pins on the bottom of the
stand cover make marks on the wall. Use the marks as a guideline for
installing the wall-mount screws (not provided). Install the screws so
that they protrude 3 mm (1/8 inch) from the wall, and then install the
IP Deskphonestand mounting holes over the screw heads. You may
need to remove the IP Deskphonefrom the wall to adjust the lower