Additional call features
169
Additional call features
Contact your system administrator to determine if the following call
features are available on your IP Deskphone.
•“Using AutoDial Transfer” on page 169
•“Using the Buzz signal” on page 170
•“Using Call Page Connect to make an announcement” on page170
•“Using Centrex/Exchange Line Switchhook Flash” on page171
•“Charging a call or charging a forced call” on page 171
•“Using Enhanced Override” on page 175
•“Using Forced Camp-on feature” on page176
•“Overriding a busy signal” on page 177
•“Using Privacy Release” on page 177
•“Using Radio Page” on page 178
•“Using Voice Call” on page 180

Using AutoDial Transfer

Use the AutoDial Transfer feature to transmit digits through your AutoDial
key to the Central Office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call from or to a CO that offers
Centrex or exchange line-type features.
To use AutoDial Transfer when picking up an incoming trunk call:
1. Press the Centrex Switchhook Line
Flash key and wait for an interrupted dial
tone.
2. Press the AutoDial key to call the
number desired.
CentrexSHF
Autodial