Appendix: Connecting the components
247
screws. When the lower screws are snug, install the IP Deskphoneon
the mounting screws, and then tighten the top screws.
Method B: Attach a 15-cm (6-inch) CAT5e cable (not supplied),
position the stand over the mounting rivets, and slide the IP
Deskphonedown the wall so that the rivets fit into the slots on the
stand.
9. Replace the stand cover. Ensure that all cables are neatly routed and
press the stand cover into place until you hear a click.
10. Put the IP Deskphonein the wall-mount position. If you wall-mounted
your IP Deskphone, put it in the wall-mount position by holding the Tilt
Lever and pressing the IP Deskphonetowards the base until the IP
Deskphoneis parallel with the base. Release the Tilt Lever and
continue to push the IP Deskphonetowards the base until you hear an
audible click. Ensure the IP Deskphoneis securely locked in position.