Avaya 1165E - page 95

Configuring Local Menu options

Figure 20: Headset menu item display

To enable a USB headset

Making a change in the Headset menu page takes effect immediately.

Note: Press the Apply button to make the changes permanent.

Press Exit to discard any changes.

1. Select USB from the Active Headset Device list.

2. Select the Enable HID Commands check box to provide full HID for

supported headsets.

Note: The following two steps applies only if the Avaya Headset

Adapter is connected. You can select the Headset Type only for the

Avaya USB Headset Adapters. If the Avaya USB Headset Adapter is

not detected, the Headset Type selection is disabled, and cannot be

modified.

3. Select the Headset type from the following list of headsets:

• DuraPlus-B (GN Netcom DuraPlus Binaural Headset)

• DuraPlus-M (GN Netcom DuraPlus Monaural Headset)

• GN2020 (GN Netcom GN2020 NC Monaural Headset)