Configuring Telephone Options
68
Configure Area Code Setup
Use the Area Code Setup menu to save up to three area codes. When
an incoming call arrives with an area code that matches one of the three
stored area codes, the incoming call number is reordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number). This reordering is also
performed when you scroll through your Callers List.
To configure area codes, press the Services key, select Telephone
Options, and then select Call Log Options.
To configure default area codes (maximum of three):
3. Press the Up/Down navigation keys to
scroll and highlight one of the following:
— Preferred name match on
— Preferred name match off
Enter
4. Choose one of the following:
— Press the Select soft key or Enter
key to save the configuration.
— Press the Cancel soft key to keep
existing configurations.
1. Press the Up/Down navigation keys to
scroll and highlight Area Code Setup.
2. Press the Select soft key.
Select
Cancel
Select