Avaya 3720 manual Accessories, Belt Clips, Telephone lanyard, Idle mode, and number input mode

In idle mode, and number input mode

●A short press on a key enter the digits 0 - 9 and the characters * and #.

●Enter a pause in number input mode by a long press on the #-key. A pause is indicated by a P in the display.

●A long press on the *- key changes the tone sender on. Tone sender on is indicated by a T in the display.

In text input mode

●A short press on a key 0 - 9, displays the first available character on that specific key. The marked character is selected after a timeout, or when another key is pressed.

●To change to upper/lower case, press the *-key before entering the character. The *-key can also be used to display only the digits.

●To add space in the text, make a short press on key 0.

●The first character entered in a message, or when adding/editing a name in the menu Contacts, will be an upper level character followed by lower level characters, unless the *-key is pressed before entering the character. To switch between Abc, ABC, abc, and 123 the *-key is pressed.

●A long press on the key # displays special characters.

●To delete a character, position the prompt right from the character to delete and press Soft key Clear.

Accessories

Belt Clips

Three belt clip options are available:

●Hinge-type clip

To prevent the telephone from slipping out of for example pocket or belt

●Swivel clip

To be able to rotate without slipping out from the case

●No clip

To be able to use the telephone without a clip

Telephone lanyard

The Telephone lanyard is 800 mm long. The lanyard is attached directly to the telephone.

26 Avaya 3720 DECT Telephone - User Guide 02/2009