Wallboard Installation and Maintenance

Wallboard 22

 

 

 

 

 

 

 

 

Wall Mounting

Once a location has been decided upon, mark its location on the wall with a pencil through the two holes in the brackets. Before drilling the holes, a suitable utility detector should be used. Once this has been done, the holes may be drilled and the brackets mounted using the relevant fixings provided.

Before mounting the display onto the brackets, the network address should be assigned. The power lead should also be attached prior to mounting.

To mount the display, first hook the bottom of the two brackets into the bottom rear recess channel of the display. See the diagram shown below.

Push the wallboard flat against the wall and push upward to fully locate the bottom half into the recess. Now allow the display to fall approximately one inch. The display should now be safely located onto the two brackets.

To remove a wall mounted display then reverse the above paragraph.

Note: The wallboard position can be adjusted by sliding sideways in either direction.

Ceiling Mounting

Using the mounting kit provided, firstly, drill the 6-mm holes for the eyehole bolts and secure them into the ceiling. Pass the spun wire chain through the eyeholes and through the housing clamps and tighten at the required height.

Remove the right hand end cheek of the wallboard by unscrewing the two fixing screws.

Slide the two nipples on the end of the spun wire chain into the middle groove of the display housing and replace the end cheek. Center the display on the hanging wires. Adjustments can be made by sliding the display to achieve the final level.

Warning

Ensure the ceiling can support the weight of the wallboard prior to fixing.

Compact Contact Center

Installation & Maintenance

40DHB0002USBG Issue 1 (11/14/2001)

Wallboard Installation and Maintenance • Page 33

Page 32 Page 34
Page 33
Image 33
Avaya 40DHB0002USBG manual Wall Mounting, Ceiling Mounting
Page 32 Page 34

40DHB0002USBG specifications

The Avaya 40DHB0002USBG is a powerful and versatile device designed to meet the communication needs of modern businesses. Widely recognized in the realm of telecommunications, this product is part of Avaya's commitment to delivering advanced solutions that enhance productivity and collaboration in the workplace.

One of the standout features of the Avaya 40DHB0002USBG is its robust audio quality. The device utilizes wideband audio technology to ensure crystal-clear voice clarity during conversations. This is essential for businesses where effective communication is crucial. The high-definition sound allows users to experience a more natural and engaging dialogue, reducing misunderstandings and improving overall efficiency.

Another significant characteristic of this device is its compatibility with Avaya's Unified Communications platform. The 40DHB0002USBG seamlessly integrates with Avaya Aura, enabling users to leverage advanced features such as presence management, instant messaging, and video conferencing. This integration promotes a more fluid communication experience across various channels, fostering teamwork and collaboration among employees.

The device is also designed with user-friendliness in mind. Its intuitive interface makes navigation simple, allowing users to access essential features without a steep learning curve. The ergonomic design and high-resolution display enhance usability, making it suitable for both office environments and remote work settings.

Security is a key consideration for modern communication devices, and the Avaya 40DHB0002USBG excels in this area. It offers features such as secure voice encryption to protect sensitive conversations and adhere to compliance standards. This assurance of security is especially critical for industries that handle confidential information.

In addition to its powerful communication capabilities, the Avaya 40DHB0002USBG supports various connectivity options, including USB and Ethernet interfaces. This flexibility enables easy integration into existing IT infrastructures, making deployment straightforward and minimizing disruption to business operations.

Overall, the Avaya 40DHB0002USBG stands out as a premier choice for organizations looking to enhance their communication infrastructure. Its blend of superior audio quality, compatibility with Unified Communications, user-friendly design, security features, and flexible connectivity options makes it an essential tool for driving productivity and collaboration in the workplace. As businesses continue to evolve in a digital-first environment, solutions like the Avaya 40DHB0002USBG are poised to lead the way in effective communication strategies.
Top Page Image Contents