![](/images/new-backgrounds/1251680/25168063x1.webp)
Wallboard Installation and Maintenance | Wallboard 22 |
|
|
|
|
Wallboard Installation and
Maintenance
Wallboard 22
Introduction
The Wallboard 22 is a two line by
The display wallboard consists of the following assemblies.
Housing: A housing that is manufactured from an aluminum extrusion with anti reflective polycarbonate screen and removable plastic end caps.
Power Supply: 9V DC switch mode power supply assembly incorporating an RJ45 chassis mounted data connector. The power supply is configurable for use from either 120V AC or 240V AC (NOMINAL VOLTAGES) supplies.
Logic Control Board: Logic control board that receives RS485 serial data from the data RJ45 connector.
Display Board Assembly:
Each display board consists of decoding and LED row and column circuitry which drives the LED matrix consisting of 18 5x8 LED blocks.
Installation
Before commencing installation, please check from the packing list that all parts are included.
Packing List:
1 x Wallboard 22
2 x Wall mount brackets
2 x Spun hanging wires
4 x Cavity rawl plugs
4 x Screws
2 x Eyehole bolts
2 x Masonry rawl plugs
2 x Housing clamps
1 x RJ45 Terminal Box
1 x IEC Power lead
Before commencing installation, please take a couple of minutes ensuring that the final location of the display will be both safe and practical for the customer. Also check that the power socket provided is suitable for this type of display.
Compact Contact Center | Installation & Maintenance |
40DHB0002USBG Issue 1 (11/14/2001) | Wallboard Installation and Maintenance • Page 32 |