Avaya 40DHB0002USBG manual Wallboard

Wallboard Installation and Maintenance Wallboard 10

Wallboard 10

Introduction

The Wallboard 10 is a single line display consisting of 10 tri-color characters. It connects via a multi-drop circuit to the host PC running the Wallboard Server application.

The display wallboard consists of the following assemblies.

Housing: A housing, which is manufactured from an aluminum extrusion with anti reflective polycarbonate screen and removable aluminum end, caps.

Power Supply: This display has an in-built DC power. This power supply has been set to the required AC voltage for the country of use.

Logic Control Board: Logic control board that receives RS485 serial data from the data RJ45 connector.

Installation

The display is supplied with 2 wall mounting brackets, ceiling mounting kit, PC connection plugs and wall fixings.

The Wallboard 10 displays all come with a 2-meter power cable provided for mains supply. Ensure the voltage requirement is compatible with the intended mains supply, and that the supply rating is greater than 5 Amp.

There are two methods of hanging the displays.

Wall Mounting

Fix the 2 wall mounting brackets using the cavity fixings provided. The bracket is angled to allow a 10 degree downward tilt to the display. Please ensure the brackets are the correct way up. See the diagram below.

Compact Contact Center	Installation & Maintenance
40DHB0002USBG Issue 1 (11/14/2001)	Wallboard Installation and Maintenance • Page 40