Avaya P3343T-ML manual Radius Commands

Chapter 8 User Authentication

Radius Commands

The following RADIUS commands are accessible from Supervisor level.

In order to...	Use the following command...
Enable or disable authentication for	set radius authentication
the P330 switch. RADIUS
authentication is disabled by
default
Set a primary or secondary	set radius authentication server
RADIUS server IP address
Configure a character string to be	set radius authentication secret
used as a “shared secret” between
the switch and the RADIUS server
Set the RFC 2138 approved UDP	set radius authentication udp-port
port number.
Set the number of times an access	set radius authentication
request is sent when there is no	retry-number
response
Set the time to wait before	set radius authentication retry-time
re-sending an access request
Remove a primary or secondary	clear radius authentication server
RADIUS authentication server
Display all RADIUS authentication	show radius authentication
configurations. Shared secrets are
not displayed.

For a complete description of the RADIUS CLI commands, including syntax and output examples, refer to Avaya P330: Reference Guide.

Avaya P334T-ML User’s Guide 51