OSD MENU | Description |
|
|
SUBMENU |
| |
PASSWORD CHANGE |
| |
VIDEO | ADJUSTMENT | 2006 / 04 / 20 |
DATE |
| |
TIME |
| 17 : 54 : 50 |
AUTO | RECORD | ON |
AUTO | SCAN | ON |
PASSWORD SETUP | NO | |
AUDIO | RECORD | ON |
AUDIO | MUTE | OFF |
VIDEO SYSTEM | NTSC | |
MUTIPLE REMOTE | OFF | |
REMOTE ID | 1 | |
|
|
|
|
|
|
AUTO SCAN |
|
AUTO SCAN | OFF |
CHANNEL - 1 | 10 SEC |
CHANNEL - 2 | 10 SEC |
CHANNEL - 3 | 10 SEC |
CHANNEL - 4 | 10 SEC |
|
|
|
|
PASSWORD SETUP :
Enable/disable full system password protection. This would prevent unauthorized user to stop video recording, change system settings and formatting the hard disk
AUDIO RECORD :
Enable/disable audio recording. To record sound, make sure the audio input device(ex: microphone) is connected to the unit
AUDIO MUTE :
Enable/disable to hear audio sound. To hear sound, make sure the unit is connected to an audio output device (ex: speaker). If user recorded video in audio mute status, there is no sound when playback
i | The audio input and output device need to |
be powered by external power. | |
|
|
VIDEO SYSTEM:
DVR system will auto detect the video system and display
SUBMENU |
| |
PASSWORD CHANGE |
| |
VIDEO | ADJUSTMENT | 2006 / 04 / 20 |
DATE |
| |
TIME |
| 17 : 54 : 50 |
AUTO | RECORD | ON |
AUTO | SCAN | ON |
PASSWORD SETUP | NO | |
AUDIO | RECORD | ON |
AUDIO | MUTE | OFF |
VIDEO SYSTEM | NTSC | |
MUTIPLE REMOTE | OFF | |
REMOTE ID | 1 | |
|
|
|
|
|
|
MUTLIPLE REMOTE:
Enable/disable multiple DVR system remote control. When user has more than one DVR system, user can use MULTIPLE REMOTE function to control all DVR system by single remote control.
REMOTE ID:
Assign the ID number for multiple DVR system remote controls. When there are more than one DVR systems, user can enable MULTIPLE REMOTE function, and then assign REMOTE ID to each DVR system. Then, user can just use one remote control to control all DVR system by pressing REMOTE ID. To remote control
multiple DVR systems, press FN and number key (remote ID number) on the remote control.
18